ZC-2 concrete light weight brick machine

ZC-2 concrete light weight brick machine which can produce light weight brick to float on the water Features:1. Density is small, reduce the construction weight. The density is 300-800 kg/m3, can float on the water, only 1/4 compared with solid clay brick, and 1/2 compared with hollow block , it can reduce the wall load 50-60%,, building lose weight 20-30%, as the construction speed is high, reduce the labor intensity and construction cost greatly. 2. Function of thermal insulation to reduce the building energy consumption. The thermal conductivity is 0.168 w / (m.k), heat preservation effect is four times compared with clay brick, it Is 3 times compared with hollow block, in this building it is warm in winter, cool in summer, You use less air condition, so 30-50% power saving, It is the first energy-saving wall.3 Admirable sound-absorbing, sound insulation performance. Porous structure makes brick with good sound-absorbing, sound insulation, 240mm thick wall insulation is 58dB volume ,it can achieve the sound insulation requirements.4. Vibrate resistance. Due to light weight, greatly reduce construction weight, two buildings aseismic level higher than clay brick.5. High strength, good processability, various sizes. Its strength it is the same with the autoclaved aerated block , it does not need coarse aggregate in production, you can saw, planer, sticky, nail according to your need , any processing but it is easy to decorate, it has a variety of size, can satisfy the need of building.Production scale: Floor area: 3500m2 (100m2 for workshop, 1800m2 for production, 1500m2 for finished products, 50 m2 for 2 offices and 50m2 for warehouse)Workers: 10, (4 for raw materials feeding and sending, 4 for moulding, 2 for demoulding and curing)Water and power: 380V power supply, total installed capacity is 17KW, and average efficiency is 8KW.per hour, running water is ok. It conforms to the environmental protection standard with no waste water, slag and waste steam in the production process. Technical Specification1. Raw material source is wide. Recycling rate is high and low cost. With fly ash and slag, wind-borned sand, sand, the limestone with low quantity soil, mine sand as the main raw material , among which one or two kinds are enough, use local materials, recycling rate is high, low cost, high profit.2. High technical content. One of its core technology. ZC - FQ gasification agent by several tesco materials according to the proportion, and to realize the air made of bricks.The core technology of ZC – FH strengthening agent to reduce the dosage of cement and production cost and make its finished product to reach the strength of autoclaved aerated bricks.3. Process is simple and easy to operate. By ZC - FQ gasification agent or ZC – FH strengthening agent to mix cement, sand, fly coal ash etc., through physical aerated, use special equipment and mold design, no need autoclave maintenance.4. The requirements for production is not high. Simple shed is ok, product factory can do without the warehouse, storage in outdoor is no problem, worker is not ask for high quality.5 .Both small and large investment , flexible production. You can start from a small investment, also can direct mass production, which can be fixed field production, also can move to production.Items of the ZC-2 concrete light weight brick machine: Component of production lineQuantityPriceZC-2 concrete light weight brick machine1Special mixer1Belt conveyor1Free mould3 Raw materials-fly ash and slag, wind-borned sand, sand, the limestone with low quantity soil, mine sand as the main raw material , among which one or two kinds are enough